Methods of maintenance and maintenance of luminaires

- Aug 24, 2017-

Lamp maintenance personnel need to undergo a certain degree of training, and master the maintenance skills. Lamps should be noticed in use:
1. Buy back the lamp, do not worry about the installation, should carefully check the signs of the lamp and read the installation of the use of safety instructions, and in accordance with the specifications of the installation, use of lamps, otherwise there may be danger.
2. The use of time is too long, to be provided by the symbol of the light source parameters in a timely manner, in the occurrence of the lamp strobe or shadow, should be replaced in a timely manner to prevent the ballast burnout and other safety accidents.
3. In the cleaning maintenance should be careful not to change the structure of the lamp, nor do you feel free to replace the parts of the lamp, after the cleaning maintenance, should be installed as is, do not leak, wrong fitting parts. In the maintenance of explosion-proof lamps, maintenance personnel should understand the performance of the luminaire and product structure, maintenance personnel should be under the warning signs to disconnect the power, the right to open the lampshade and then dust dirt cleaning. Regular cleaning lamps, can improve the lighting efficiency and heat dissipation, but also can effectively extend the service life of the lamp.
4. When the light source is damaged, according to the index requirements for replacement, maintenance personnel in the maintenance of cleaning in accordance with the Safety manual operation or contact the manufacturer consultation, can not arbitrarily replace the load more than the specified power source, so as not to cause damage to the lamp.
5. In this reminder, lamps and lanterns in use as far as possible not frequent switching power supply, because the lamp in the frequent start of the moment, through the light source of the current is greater than the normal working current, so that the light source is only sharp heating, thus reducing the service life.